 |
|||
|
|
|||
|
Page Title:
Filling Portable Flamethrower and Flame Landmine from 55-Gallon Drums |
|
||
| ||||||||||
|
|
 1
Quick-disconnect coupling half
2
Adapter
3
Hose
Figure 16. Attaching charging line to pressure tank (removed from M2A1-7 flamethrower).
ber hose, and the pressure regulator (b (1) through (4)
23.
Filling Portable Flamethrower and Flame
above).
Landmine from 55-Gallon Drums
(2) Screw the pressure regulator adapter
(2, fig. 15) into the fitting of the pressure regulator (1).
WARNING
(3) Screw the cylinder adapter (3) from the
Use
only
authorized
gages,
filling line assembly (27, fig. 2) into the pressure regulator
regulators, hose, pipe, and tubing on
adapter.
commercial air cylinders, high-
(4) Connect the cylinder adapter to the
pressure spheres, and pressure
commercial air cylinder (4, fig. 15).
tanks. DO NOT IMPROVISE.
f. Pressure Line from ABC-M9-7 or M9A1-7
Flamethrower High-Pressure Sphere.
WARNING
(1) Set up the charging line (b(1) through (8)
When applying pressure to a fuel
above).
drum, always use the pressure
(2) Attach the female quick-disconnect end of
regulator supplied with the kit. Using
the charging hose assembly (18, fig. 2) to the male
a different
quick-disconnect coupling on the high-pressure sphere
(3, fig. 10).
27
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals