 |
|||
|
|
|||
|
Page Title:
Figure 2. Filling line assembly, test gages, charging hose assembly, and hose assembly. |
|
||
| ||||||||||
|
|
 1
Pressure gage
- 13
Safety plug assembly
25
Safety plug assembly
2
Right angle adapter
14
Pressure gage
26
Pipe plug
3
Quick-disconnect coupling half
15
Boot
27
Filling line assembly
4
Agent tank test gage assembly
16
Pneumatic hose assembly
28
Pressure gage
5
Pressure gage
17
Quick-disconnect coupling half
29
Testing gage adapter
6
Testing gage adapter
18
Charging hose assembly
30
Pieformed packing
7
Preformed packing
19
Pressure cylinder adapter
31
Fuel tank test gage assembly
8
Fuel tank test gage assembly
20
Pressure gage
32
Hose
9
Safety plug assembly
21
Connector-and-adapter assembly
33
Charging line adapter
10
Gage extension assembly
22
Angle valve
34
Valve assembly
11
Pressure gage
23
Straight cross adapter assembly
35
Bleeder valve
12
Pressure cylinder test gage
24
Flexible metal hose assembly
36
Hose assembly
assembly
Figure 2. Filling line assembly, test gages, charging hose assembly, and hose assembly.
two safety plug assemblies (25) with straight cross
which is scaled from zero to 600 psi in increments of 20
adapter assemblies (23), and a flexible metal hose
psi, a testing gage adapter (6), and a preformed packing
assembly (24). The filling line assembly (27) is used to
(7). The test gage assembly (8) is used to test and
attach pressure lines to commercial air cylinders. An
adjust pressure regulators on M2A1-7 flamethrowers.
g. Agent Tank Test Gage Assembly. The agent
extra metal hose is provided to join two or more filling
line assemblies.
tank test gage assembly (4) consists of a pres- sure
e. Pressure Cylinder Test Gage Assembly. The
gage (1), which is scaled from zero to 160 psi in
pressure cylinder test gage assembly (12) consists of a
increments of 20 psi, a right angle adapter (2), and a
pressure gage (11), which is scaled from zero to 3000
quick-disconnect coupling half (3).
psi in increments of 100 psi, a gage extension assembly
The test gage assembly (4) is used to test and adjust the
(10), and a safety plug assembly (9). The test gage
pressure regulator on the M3 riot control agent disperser.
h. Fuel Tank Test Gage Assembly. The fuel tank
assembly (12) is used to determine the pressure of the
M2A1-7 flamethrower pressure tank.
test gage assembly (31) consists of a pressure gage
f. Fuel Tank Test Gage Assembly. The fuel tank
(28), which is scaled from zero to 600 psi in increments
test gage assembly (8) consists of a pressure gage (5),
of 20 psi, a testing gage
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals