Figure 1. M27 service kit (packed).

1 Packing chest

b. Charging Hose Assembly. The charging hose

charging line adapter (33) on one end and a valve

assembly (34) on the other end. Rotating the bleeder

assembly (18, fig. 2) consists of a dial-indicating

valve (35) clockwise closes the valve; rotating it

pressure gage (14), which is encased in a protective

counterclockwise opens the valve. The hose assembly

rubber boot (15), a pneumatic hose assembly (16), a

(36) is used to transfer air from a pressure source to a

female quick-disconnect coupling half (17), and a safety

commercial air cylinder, high-pressure sphere, or

plug assembly (13). The pressure gage is scaled from

pressure tank. It is also used to transfer air to a

zero to 3000 psi in increments of 1,000 psi. The

flamefuel container when filling portable flamethrower

charging hose assembly (18) is used with the AN-M4

fuel tanks.

compressor to air charge commercial air cylinders, high-

d. Filling Line Assembly. The filling line assembly

pressure spheres, and pressure tanks of portable

(27) consists of two pressure cylinder adapters (19), two

flamethrowers or riot control agent dispersers.

c. Hose Assembly. The hose assembly (36)

pressure gages (20), which are scaled from zero to 3000

psi in increments of 100 psi, two connector-and-adapter

consists of a 6-foot rubber hose (32) that has a

assemblies (21), two angle valves (22), two pipe plugs

(26),