 |
|||
|
|
|||
|
Page Title:
Figure 15. Filling M2A1-7 flamethrower from 55-gallon drum by using commercial air cylinder. |
|
||
| ||||||||||
|
|
 1
Pressure regulator
4
Commercial air cylinder
6
Hose
2
Pressure regulator adapter
5
Pipe bushing screwed into
7
Pipe nipple
3
Cylinder adapter
bunghole
8
Gate valve
Figure 15. Filling M2A1-7 flamethrower from 55-gallon drum by using commercial air cylinder.
d. Pressure Line from M2A1-7 Flamethrower
(5) Connect the quick-disconnect coupling
Pressure Tank.
half (1) to the male coupling on the pressure tank as
shown in figure 16.
(1) Set up the charging line (b(1) through (7)
e. Pressure Line From Commercial Air Cylinder.
above).
(2) Remove the charging line adapter (33, fig.
WARNING
Always
secure
commercial
air
(3) Screw the pipe-to-tube adapter (2, fig.16)
cylinders to prevent them from
into the end 6f the 6-foot rubber hose (3).
falling, rolling, or moving.
(4) Screw the quick-disconnect coupling half
(1) Prepare a drum of fuel, an 8-foot rub-
(1) into the adapter (2).
26
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals