Figure 2-8. Carrier section.

(5) Disconnect and remove all strap assemblies

(2) Connect the adapter (7, fig. 2-6) to the

from the frame (10, fig. 2-8).

diffusion tube nut (6).

(6) Remove the attaching hardware to remove

(3) Cross both hose assemblies (5) and connect

the frame (10) from the agent tanks.

the quick-disconnect coupling half (3) that is on each

hose to the pipe and cap assembly (4).

b. Assembly.

(4) Install the pressure tank and valve assembly.

Refer to TM 3-1040-214-12.

(1) Connect the agent tanks to the frame with the

hardware removed in a(16) above.

2-9