|
|
![]() TM 11-405-10
Figure 34. Lamp PH-422-A, disassembled.
(5) Replace the light filter and the retainer
36. Repairs
ring.
(6) Replace the lamp holder in its mounting
the safelight is necessary, proceed as follows:
bracket.
(1) Remove
the lamp holder from the
b. Enlarger Lamp. If the lamp in the enlarger body
mounting bracket.
must be replaced (par. 35b), proceed as follows:
(2) Unscrew the retainer ring and remove the
(1) PH-129-(*) or PH-639 (*)/TF.
light filter. Be careful not to drop the light
(a) Pull the control lever (fig.
filter.
forward and over the control lever
(3) Unscrew and remove the lamp.
stop.
(4) Screw the replacement lamp into the lamp
holder.
AGO 5894A
48
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |