 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 11-405-10
(b) Loosen the knurled screws (fig. 2)
(g) Return the control lever (fig. 14) to
and remove the condenser lens
its original position.
assembly.
(2) EN-16 (1).
(c) Remove the lamp (not shown) from
(a) Loosen the knurled screws (fig. 3).
inside the lamp house.
(b) Remove the lamp house reflector.
(d) Check the condition of the reflector
(c) Check the condition of the inside of
in the lamp house. If it is dirty,
the lamp house reflector. If the
remove the projection lens, clean
inside of the lamp house reflector is
the reflector with a clean lint-free
dirty, clean it with a clean lint-free
cloth, and then replace the
cloth.
projection lens.
(d) Remove the lamp and insert a
(e) Insert a replacement lamp in the
replacement lamp.
lamp house.
(e) Replace the lamp house reflector
(f) Replace
the
lens
and hand-tighten the knurled screws
assembly and hand-tighten the
knurled screws.
AGO 5894A
49
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals