Section III. ORGANIZATIONAL PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)

TM 5-3610-254-14

Section III. ORGANIZATIONAL PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)

4-14. INTRODUCTION TO ORGANIZATIONAL PREVENTIVE MAINTENANCE CHECKS AND SERVICES

Organizational preventive maintenance checks and services are listed in table 4-1. Observe the following:

a. Items to be inspected are indicated by a black dot in the appropriate column.

b. If your equipment fails to operate, troubleshoot with proper equipment. Report any deficiencies using the proper

forms, see TM 38-750.

c. If you find a faulty condition that you are not authorized to correct, notify direct support maintenance.

Table 4-1. ORGANIZATIONAL PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)

Legend

M - Monthly

Q - Quarterly

S - Semiannually

ITEM

INTERVAL

ITEM TO BE

NO.

INSPECTED

PROCEDURES

Light table

Inspect the light table for condition and

security of attachment. Inspect lights

for proper operation. If inspection

indicates that replacement of the light

table is necessary, refer to paragraph 4-19.

PMT Processor

Inspect processor for general condition

and security. If inspection indicates

that replacement of the processor is

necessary, refer to paragraph 4-22.

Camera Vacuum

Inspect for security and proper opera-

Pump

tion. If inspection indicates that

replacement of camera vacuum pump is

necessary, refer to paragraph 4-23.

Safelight

Inspect lamps for correct illumination.

Assembly

Inspect lamp covers for condition. If

inspection indicates that replacement of

the lamp assembly is necessary, refer to