|
|
TM 10-4930-233-14
TM 4930-14/1
AIR COMPRESSOR ASSEMBLY
4-22. BELTS - REPLACE/ADJUST
This task covers:
a. Removal
b. Installation
c.
Adjustment
INITIAL SET-UP:
Tools
Equipment Condition Page
General Mechanics Tool Box
Enclosure Removed (para 4-11)
(Section III, Item 1, App B)
a.
Removal
NOTE
Follow step (1) through (5) for removal of compressor drive belts and guard. Proceed to step (6)
for removal of alternator belt and guard.
(1)
Disconnect engine exhaust tube from exhaust diverter.
(2)
Remove four mounting bolts, four lockwashers and four nuts (para 4-31).
(3)
Slide compressor back against tool box and fuel tank (para 4-31).
(4)
Remove six screws (8) and three brackets (9) from belt guard (7).
(5)
Remove two nuts (1), two lockwashers (2), two washers (3) and two screws (4).
(6)
Remove screw (5), lockwasher (6) from belt guard (7).
(7)
Remove two screws (13) and two flatwashers (14) from inner belt guard (15)
(8)
Slide inner belt guard (15) up and remove.
(9)
Move front belt guard (7) forward as much as possible.
4-57
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |