ENCLOSURE - REPLACE

TM 5-4930-233-14

TM 4930-14/1

ENCLOSURE AND SKID ASSEMBLY

4-11.

ENCLOSURE - REPLACE

This task covers:

Removal

Installation

INITIAL SET-UP:

Personnel Required

Tools

General Mechanic' Tool Box

(Section III, Item 1, App B)

CAUTION

Be certain all controls are pushed in and take care during removal so not to damage lights on

control panel.

Removal

NOTE

Be sure that all doors are closed.

(1)

Turn six thumbscrews (1) to release fuel cap and filler neck assembly (2) from enclosure assembly

(3).

(2)

Loosen clamp at fuel tank and remove fuel cap and filler neck assembly (2) (para 4-14).

(3)

Remove four lifting rings (4), four washers (5) and four rubber washers (6).

(4)

Lower rear jacks (para 2-7).

WARNING

All nonessential personnel must be clear of vehicle area to avoid injury.

(5)

With a person on each comer, lift enclosure assembly (3) up and off of skid. Place on level surface.

4-16