 |
|||
|
|
|||
|
Page Title:
REMOVE CRANKSHAFT REAR SEAL 11-1161 |
|
||
| ||||||||||
|
|
 3208 INDUSTRAIL AND MARINE ENGINES
DISASSEMBLY AND ASSEMLBLY
CRANKSHAFT REAR SEAL,
CRANKSHAFT REAR SEAL WEAR SLEEVE
REMOVE CRANKSHAFT REAR SEAL 11-1161
Tools Needed
A
1P3075
Puller Group
1
start by:
a)
remove marine gear (marine engine only)
b)
remove flywheel
1.
Remove the
crankshaft
rear
seal
with
tooling (A).
INSTALL CRANKSHAFT REAR SEAL 12-1161
Tools Needed
A
5P290
Pilot
1
1P5515
Bolt
2
5P285
Ring
1
9S8864
Pusher Plate
1
9S8858
Nut
1
5P288
Ring
1
1.
Install tooling (A) as follows:
a)
Install pilot (1) on the crankshaft with bolts
(2). Install ring (5) on pilot (i).
b)
Put 7F2770 Cement on the outer metal
surface of the seal. Install the seal on the
pilot with the lip of the seal toward the front
of the engine.
c)
Install pusher plate (6) and ring (3) over
pilot (1). Install nut (4). Tighten the nut
until the ring (5) makes contact with the
flywheel housing.
2. Remove tooling (A).
end by:
a)
install flywheel
b)
install marine gear (marine engine only)
REMOVE CRANKSHAFT REAR SEAL WEAR
SLEEVE
Tools Needed
A
8S7164
Puller Group
1
start by:
a)
remove flywheel
b)
remove crankshaft rear seal
1.
Install tooling (A) and remove the wear sleeve
from the crankshaft.
90
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals