|
|
3208 INDUSTRAIL AND MARINE ENGINES
DISASSEMBLY AND ASSEMLBLY
MARINE GEAR
REMOVE MARINE GEAR (MARINE
ENGINE)
11-3300
start by:
a)
remove starter
1.
Disconnect the oil outlet line (2) and inlet line
(3).
2.
Install two 5/8"- 11 NC forged eyebolts (4) and
nuts (6) in the marine gear side supports (5) if
so equipped. Fasten a hoist and remove bolts
(1).
3.
Remove the marine gear. Weight of the
marine gear is 300 lb. (136 kg).
INSTALL MARINE GEAR (MARINE
ENGINE)
12-3300
1.
Put 7M7260 Liquid Gasket on the mounting
surface of the marine gear.
2.
Fasten a hoist to the marine gear and put it in
position on the engine.
3.
Install the bolts that hold it.
4.
Connect the oil outlet line and inlet line.
end by:
a)
install starter
NOTE: See MARINE GEAR, TWIN DISC MG-506,
FORM NO. REG00498, for disassembly and assembly
of marine gear.
88
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |