DISASSEMBLE GOVERNOR

3208 INDUSTRIAL AND MARINE ENGINES

DISASSEMBLY AND ASSEMBLY

GOVERNOR

DISASSEMBLE GOVERNOR

15-1264

start by:

a) separation of governor from fuel injection

pump housing

1. Remove the shaft (2) from the carrier (3).

2. Remove dowel (1) from the shaft (2).

3. Remove the weights (4) from the carrier (3)

by removing the dowels (5).

4. Remove the ring (10) from the thrust collar (6)1

5. Remove a race (9), a bearing (8), and a race

(7) from the thrust collar (6).

6. Remove the two bolts (12) that hold the

lever (14) to the shaft (13). Slide the shaft

(13) out of the governor housing and re-

move the lever (14) and the washers (11)

between the lever and the housing.

7. Remove the seal (15) from the governor housing.