|
|
FUEL SYSTEM
TESTING AND ADJUSTMENT
12.
THRUST COLLAR IN POSITION
INSTALLING PIN 14. Pin .
11. Thrust collar.
12. Install screw (15) and nut (17) in the pump housing.
9. Put torque spring assembly (13) in position on the
pump housing.- Tighten bolts (12) that hold the torque
spring assembly to the pump housing.
SCREW INSTALLED
15. Screw. 17. Nut.
13. Put lever (9) in position in the pump housing and in
TORQUE SPRING INSTALLIED
the groove in thrust collar (11). Put a new O-ring seal on
shaft (8). Install shaft (8) in the pump housing and through
12. Bolts. 13. Torque spring assembly .
the holes in lever (9).
10. Install cover (10) on the pump housing.
INSTALLING COVER
LEVER INSTALLED
10. Cover.
8.Shift. 9. Lever. 11.Thrust cotter.
11. Put thrust collar (11) in position between the
flyweights. Lift the flyweight and push thrust collar
14. Install cover (5) on the pump housing.
(11) forward.
68
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |