Procedural Steps: - TM-5-3835-222-BD0101

TM 5-3835-222-BD

b. Measure the replacement hose so that there are at least two inches of hose covering each

end of the tube.

c. Cut the correct length of replacement hose (see para 8-15).

d. Attach the hose to the tube with clamps:

(1)

Roughen the ends of the tube with coarse sandpaper.

(2)

Slide the clamps to the middle of the hose.

(3)

Slide the hose over the roughened area of the tube.

(4)

Tighten the clamps over the area where the tube and hose connect.

8-19