Option 3: Short Hose Fabrication:

TM 5-3835-222-BD

Option 3: Short Hose Fabrication:

a. Use a short section of inner tube or rubber sheet cut to required length,

b. Coat the tubing ends with sealant.

c. Slip the material over the tubing ends.

d. Wrap the innertube as tightly as possible on the tubing.

e. Secure the innertube using hose clamps or tightly wound wire.

f. Refill coolant to proper level and check for leaks.

Record the BDAR action taken. When the mission is completed, as soon as practicable, repair the

equipment using standard maintenance procedures.

6-12