Option 1: Pipe Insert:

TM 5-3835-222-BD

Procedural Steps:

Option 1: Pipe Insert:

a. Cut out damaged hose section.

b. Cut a section of pipe longer than the removed hose.

c. Coat the pipe ends with gasket sealer.

d. Insert the pipe into the damaged hose ends.

e. Secure the hose ends with clamps or twisted wire.

f. Refill coolant to proper level and check for leaks.

Option 2: Other Hose.

a. Cut out damaged hose section.

b. Cut a section of substitute material longer than the removed section.

c. Coat ends of damaged hose or tube with gasket sealer.

d. Slip the hose over the ends of the damaged hose or tube.

e. Secure the hose with clamps or twisted wire; do not overtighten and restrict the coolant flow.

f. If the damaged hose inside diameter equals the outside diameter of the hose, the hose can be

inserted into the damaged hose and secured. This, however, will not work with tubing.

g. Refill coolant to proper level and check for leaks.

6-11