Table 5-2. Pre-Test Inspection

TM 32-5865-069-24&P

Table 5-2.

Pre-Test Inspection

Assembly/

Inspection

Normal

Procedure

method

indication

component

RSPU

Visual

a. Inspect exterior for dents,

a thru c must be

free of defects.

scratches, corrosion, dam-

aged or missing hardware.

Inspect all controls, indi-

cators, and connections for

broken, loose or damaged

parts.

c. With top and bottom covers

removed, inspect all

cables, wiring, and

switches for burned con-

tacts and insulation, bro-

ken or loose connections

and other signs of damage.

A1 thru A10 and A12 contain parts sensitive to damage by Electro-

Use ESD precautionary procedures when

static Discharge (ESD).

touching, removing or inserting these assemblies.

Inspect for discolored,

CCA A1 - A1O Visual

a thru c must be

loose, broken or burned

free of defects.

CCA A12

components and connections.

Inspect for cold solder

joints, and excessive

solder.

c. Inspect board for cracks,

chips and breaks.

Visual

a. Inspect for dents,

IF Down

a and b must be

scratches, corrosion,

free of defects.

Converter

damaged, loose or missing

(A14)

hardware.

Inspect all cables and con-

Converter

nectors for broken or loose

IF (A20)

connections and other signs

of damage.

5-18