Table 2-2. DF Test Configuration Cables

TM 32-5811-024-14&P

Table 2-2. DF Test Configuration Cables

Cable

Function

W210

Connects 3- ac blower power to df display.

W211

Connects +28-V dc power to the df display.

W212

Shorting cable used in conjunction with digital processor

test set to test the df display's ability to transfer df

receiver commands.

W213

Connects serial interface test (same as flux gate compass

I/O) of digital processor test set to the serial interface

CCA of the df display.

W216

Connects 3- ac power to the digital processor test set.

W217

Connects +28-V dc power to the digital processor test set.

W218

Coaxial cable for monitoring the df control integrator ramp

waveform with an oscilloscope.

W238

Connects the integrator monitor of the df control to the

oscilloscope.

W239

Spare cable with no current application.

W240

Spare cable with no current application.

W243

Tests analog 0 when used in conjunction with CP3.

W244

Tests analog 0 when used in conjunction with W205 and CP3.

Moves from CP3 to oscilloscope.

CP3

T connector used to tap the oscilloscope to the analog

test signal.

W239P1

Connected to the digital processor test set JO1 connector

for a self-test of serial interface test CCA A6.

W240P1

Connected to the digital processor test set J13 connector

for a self-test of RF processor simulator CCA A5.

2-7