Click here to make tpub.com your Home Page

Page Title: ELECTRICAL RECEPTACLE CONNECTORS,
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home
   
Information Categories
.... Administration
 Advancement
 Aerographer
 Automotive
 Aviation
 Construction
 Diving
 Draftsman
 Engineering
 Electronics
 Food and Cooking
 Logistics
 Math
 Medical
 Music
 Nuclear Fundamentals
 Photography
 Religion
   
   

 
TM 32-5410-221-14&P
5-14
ELECTRICAL RECEPTACLE CONNECTORS,
b. Installation.
NOS. 1 AND 3 THROUGH 9. See figure E-10.
(1) Install receptacle on electrical duct cover,
using four washers (7), screws (4) and nuts (6).
WARNING
(2) Solder lead wires to receptacle.
(3) Attach electrical duct cover to electrical
Dangerous voltage is present in the
duct.
electrical circuits. Death on contact
(4) Set AIR CONDITIONER circuit breaker to
may  result.
Use  all  safety
ON and test the new receptacle.
precautions and be extremely careful
when
performing
electrical
5-16
LAMP FIXTURE ASSEMBLY. See figure E-11.
troubleshooting and repairs.
WARNING
a. Removal.
(1) Set appropriate circuit breaker to OFF.
Dangerous voltage is present in the
See figure 5-1.
electrical circuits. Death on contact
(2) Remove receptacle cover plate (1) by
may  result.
Use  all  safety
removing two screws (2).
precautions and be extremely careful
when
performing
electrical
(3) Detach receptacle (3, 8, or 9) from
electrical duct by removing two screws (2).
troubleshooting and repairs.
(4) Tag and disconnect lead wires from
receptacle.
a. Removal.
(5) Remove receptacle.
(1) Set LIGHTS circuit breaker to OFF.
Provide other lighting as required.
(2) Remove lamp fixture cover by removing
b. Installation.
four screws (1), flat washers (2) and lockwashers (3).
(1) Connect lead wires to receptacle.
(3) Tag and disconnect lead wires.
(2) Attach receptacle to electrical duct using
(4) Disconnect conduit fitting from lamp
two screws (2).
housing.
(3) Install receptacle cover plate (1) using two
(5) Detach lamp fixture from shelter wall.
screws (2).
(6) Remove lamp fixture.
(4) Set appropriate circuit breaker to ON and
test new receptacle. See figure 6-1.
b. Installation.
5-15
AIR
CONDITIONER
ELECTRICAL
(1) Feed lead wires through lamp fixture
RECEPTACLE NO. 2. See figure E-10.
wiring hole into lamp fixture housing.
(2) Connect conduit fitting to lamp fixture.
WARNING
(3) Attach lamp fixture to shelter wall.
(4) Connect lead wires.
Dangerous voltage is present in the
(5) Install lamp fixture cover, using four
electrical circuits. Death on contact
lockwashers (3), flat washers (2), and screws (I).
may  result.
Use  all  safety
(6) Set LIGHTS circuit breaker to ON and test
precautions and be extremely careful
lamp fixture.
when
performing
electrical
troubleshooting and repairs.
5-17
GROUND LUG ASSEMBLY. See figure E-12.
a. Removal.
WARNING
(1) Set AIR CONDITIONER circuit breaker to
OFF.
Dangerous voltage is present in the
(2) Detach electrical duct cover panel from
electrical circuits. Death on contact
electrical duct.
may  result.
Use  all  safety
(3) Tag  and  unsolder  lead  wires  from
precautions and be extremely careful
receptacle (5).
when
performing
electrical
(4) Remove receptacle from electrical duct
troubleshooting and repairs.
cover by removing four nuts (6), screws (4) and washers
(7).
5-10

Privacy Statement - Press Release - Copyright Information. - Contact Us

 Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business