GROUND LUG ASSEMBLY

TM 32-5410-221-14&P

a. Removal.

b. Installation.

(1) Set all circuit breakers and equipment

(1) Install one ground terminal (3), one

power switches to OFF. See figure 5-1. Provide other

lockwasher (4), two flat washers (2), and two nuts (1) on

lighting as required.

bolt (7).

(2) Unplug main power cable from shelter

(2) Install bolt (7) in shelter wall.

receptacle.

(3) Install one nut (1), one lockwasher (4),

(3) Remove one wing nut (5), two flat

one ground terminal (3), two flat washers (2). and one

washers (2), one ground terminal (3), one lockwasher

wing nut (5) on bolt (7) on exterior shelter wall.

(4), and one nut (1) from bolt (7) on exterior shelter wall.

(4) Using Multimeter AN/USM-223, test

(4) Remove bolt (7) from shelter wall.

ground lug assembly for negligible resistance.

(5) Remove two nuts (I), two flat washers (2),

(5) Plug main power cable into shelter

one lockwasher (4), and one ground terminal (3) from

receptacle.

bolt (7).

(6) Set circuit breakers and equipment power

switches to ON.

5-11/(5-12 blank)