POWER CABLE REEL FAILS TO ROTATE PROPERLY.

TM 32-5410-221-14&P

Table 5-2. Organizational Maintenance Troubleshooting - Continued

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

Step 2. Check socket for damage.

Replace socket if damaged. If there is no damage, replace bulb.

MECHANICAL

4. POWER CABLE REEL FAILS TO ROTATE PROPERLY.

Step 1. Check to see if reel is free from obstructions.

Remove obstructions.

Step 2. Check to see if reel is damaged.

Replace damaged reel.

Step 3. Check to see if reel is properly lubricated.

Lubricate reel bearings as required. See 5-5b.

Section VI. MAINTENANCE OF ELECTRICAL EQUIPMENT SHELTER S-281/G

5-8

GENERAL.

This

section

contains

c. Remove grease or oil with trichloroethane, item

organizational maintenance instructions as authorized

5, Appendix F. Wipe dry with clean, dry, lint-free cloth.

by the MAC. Instructions are for equipment cleaning,

d. Remove caked dirt with one-inch bristle brush

and removal and installation of equipment within the

soaked with trichloroethane. Wipe dry with clean, dry,

shelter.

lint-free cloth.

5-9

CLEANING.

5-10

SHELTER.

WARNING

a. Refer to TB 43-0124 for shelter maintenance.

Refer to TM 11-5410-206-14P for shelter repair parts.

The fumes of trichloroethane are

b. Refer to the applicable manual for air

toxic. Provide adequate ventilation

conditioner maintenance; models vary.

whenever it is used. DO NOT USE

c. Refer to the applicable manual listed in

NEAR

OPEN

FLAME.

Appendix A for maintenance of additional authorized

Trichloroethane is not flammable,

equipment.

but exposure of the fumes to an

d. Replace floor mat as follows:

open flame or hot metal forms highly

toxic phosgene gas.

WARNING

a. Remove dust and dirt from equipment with lint-

The shelter must be well ventilated

free cloth or vacuum cleaner.

when using cleaners and paints on

b. Remove dust and dirt from hard-to-reach areas

the shelter interior.

with one-inch bristle brush or vacuum cleaner.

5-9