Table 5-1. Organizational Preventive Maintenance Checks and Services - Continued

TM 32-5410-221-14&P

Table 5-1. Organizational Preventive Maintenance Checks and Services - Continued

W - Weekly

Q - Quarterly

A - Annually

H - Hours

M - Monthly

S - Semiannually

B - Biennially

MI Miles

ITEM

INTERVAL

Item to be

Procedures

Equipment will be reported

QSAB

H MI

inspected

Not Ready (Red) if:

SHELTER ELEC-

WARNING

TRICAL WIRING

AND COMPONENTS

Disconnect power before per-

forming step 12.

Check for loose collections. Tighten as

necessary.

Inspect insulation, wires, and terminals for

Damage renders shelter

damage such as cuts, abrasions, frays, breaks,

inoperative or causes safety

kinks, and bends. Repair damage or replace

hazard.

parts as necessary.

Check for proper operation of circuit

Inoperative item renders

breakers, switches, light units, receptacles,

shelter inoperative or causes

and plugs. Repair or replace as necessary.

safety hazard.

MECHANICAL

Check for loose mountings on power cable

EQUIPMENT

reel, air conditioner, light fixtures, power

box, and electrical ducts. Tighten loose

mounting.

14c

LUBRICATION

As required, lubricate shelter door hinges

and latch and power cable reel bearings.

EQUIPMENT PARTS

Inspect shelter, shelter support fittings, equip-

Missing parts render shelter

AND INVENTORY

ment and equipment support fittings for loose

inoperative.

or missing parts. Tighten or replace loose or

missing parts.

FLOOR MAT

Check for excessive wear or other damage.

Replace as necessary.

c. Lubrication may be required more frequently when the shelter is operated under unusual conditions.

5-6