ORGANIZATIONAL PREVENTIVE MAINTENANCE CHECKS AND SERVICES SCHEDULE (CONT)

TM 3-1040-276-23

ORGANIZATIONAL PREVENTIVE MAINTENANCE CHECKS AND SERVICES SCHEDULE (CONT)

M - MONTHLY

S - SEMIANNUALLY

Item

Interval

To Be

Item

Procedures

inspected

No.

m. While holding air pump handle (14), insert plunger (16) into air pump

Magneto air

tube (15) and push handle and clamp until clamp mates with tube and

pump

assembly

slides onto bracket (4). Install cap screw (11) and washer (12) through

frame (13) and into clamp (5).

(cont)

NOTE

Aline teeth on rack with ignition magneto gear. Operate

handle to make sure teeth are alined.

n. Position ignition magneto assembly (6) housing onto clamp (5) and

install cap screw (3) with washer.

o. Install cap screw (7), flat washer (8), nut (9), and Iockwasher (10) into

ignition magneto assembly (6) housing and clamp (5).

p. Connect ignition cable (1) to ignition magneto assembly outlet (2).

q. Operate smoke generator (TM 3-1040-276-10).

Change 1

2-7