Tabulated Data - TM-3-1040-221-120010

5-gallon gasoline can to a portable flamethrower fuel

(2) A 9-inch adjustable wrench.

tank.

(3) An 8-inch open-end adjustable wrench.

m. Adapters, Quick-Disconnect Coupling Half, Tube

(4) A multiple-head bung wrench (fig. 5).

Reducers, and Check Valve Assembly. The following

(5) A pair of 8-inch slip-joint pliers.

(6) A flat-tip screwdriver,

items are used in the M27 service kit to assemble

(7) Two 5/32-inch sockethead screw keys. The

pressure or fuel lines:

screw keys are used to test and adjust pressure

(1) Two pipe-to-tube adapters (one 9/16- in.-18NF

regulators on portable flamethrowers and riot control

male thread by 3/4-in.-14NPT male thread (6, fig. 3); and

agent dispersers.

one 6/8-in.-18NF female thread by 1/4-in.-18NPT male

(8) A 1/4-pound-can of antiseize compound.

thread (10)).

(9) A 1/2-pound coil of carbon-steel wire.

(2) One quick-coupling adapter assembly (12), one

The wire is used to clean the atomizer hole in a

quick-disconnect coupling half (11), one pressure

flamethrower.

regulator adapter (2), three tube reducers (7, 8, and 9),

and one check valve assembly (1).

(3) One tube reducer (7) (contains a 1/2- in.-13NC

4. Tabulated Data

male thread and a 3/4-in.-16NF male thread). One tube

All data are approximate.

reducer (8) (contains a 1/2- in.-20NF female thread and

a 0.093-in.-14NS male thread). One tube reducer (9)

Weight of complete kit in packing

(contains a 5/8-in.-18NF female thread and a 9/16-in.-

chest----------------------------------- 85 lb.

18NF male thread).

Length -------------------------------------- 24 % in.

(4) One check valve assembly (1).

Width --------------------------------------- 19% in.

n. Tools, Antiseize Compound, and Wire. The

Height--------------------------------------- 11% in.

following items are included in the M27 service kit. The

Cubage------------------------------------- 3.5 cu. ft.

tools are used to connect and disconnect air-pressure

lines and fuel-filling lines.

(1) A 15-inch open-end adjustable wrench.