SERVICE UPON RECEIPT

TM 11-6665-209-20

2-3. SERVICE UPON RECEIPT

Perform the steps outlined in Table 2-1 to determine the condition of the Radiac Set

and any obvious defects.

TABLE 2-1.

SERVICE UPON RECEIPT

Action

Item

Location

1) Inspect for rust, fungus, paint damage and

Case

broken handles and clasps.

2) Reject the case if damage prevents it from

functioning properly.

1) Inspect the harness for tears.

Harness

Case

2) Inspect the clips for damage.

3) Reject the harness if damaged.

1) Inspect for dirt, fungus and grease.

Headset

Case

2) Inspect for breaks and cracks in the headset.

Inspect for tears in the cables.

3) Check the headset connector for looseness.

4) Reject the headset if damage will prevent it

from functioning properly.

1) Inspect for grease, dirt and fungus.

Radiacmeter

Probe

2) Inspect for tears in the cable.

3) Reject if the cable is torn.

1) Inspect for grease, dirt and fungus.

Radiacmeter

Case

2) Check for broken glass and cracks on the in-

dicating meter scale window.

3) Check the range switch for looseness or bin-

ding. Check that range switch is not cracked

or missing.

4) Check the captive screws for broken-threads

or gaskets.

5) Check the battery compartment for corrosion

or rust and the rubber gasket for damage.

6) Operational check - refer to TM

11-6665-209-10, Preventive Maintenance

Checks and Services,

7) Reject if indicating meter glass is broken or if

operational check is inconsistent.

2-2