|
|
TM 11-6625-273-20P Organizational Mainte-
acter alphabetical abbreviation; e.g, ea, in, or,
nance Repair Parts and
etc., and is the basis used to indicate quantities
Special Tools Lists. In-
and allowances in subsequent columns. When the
sulation Breakdown Test
unit of measure differs from the unit of issue, the
Sets AN/GSM-6 and
lowest unit of issue that will satisfy the required
AN/GSM-6A.
units of measure will be requisitioned.
TM 11-6625-273-35
Field and Depot Mainte-
e. Quantity Incorporated in Unit. This column
nance Manual: Insula-
indicates the quantity of the item used in the
tion Breakdown Test
equipment. Subsequent appearances of the same
Sets AN/GSM-6 and
item in the same assembly are indicated by the
AN/GSM-6A.
letters "REF".
f. 30-Day DS/GS Maintenance Allowances.
NOTE
a. This manual contains one cross-reference
Allowances in GS column are for GS
index (see IV) to be used to locate a repair part
maintenance only.
when either the Federal stock number or refer-
ence number (manufacturer's part number) is
(1) The repair parts indicated by asterisk
entries in separate allowance columns for DS
known. The first column in the index is prepared
and GS represent those authorized for use at that
in numerical or alphanumeric sequence in as-
category of maintenance to be requisitioned on
cending order, The reference numbers (manu-
an "as required" basis, until stockage is based on
facturer's part numbers) are listed immediately
demand in accordance with AR 710-2.
following the last listed Federal stock number in
the index of Federal stock numbers.
(2) Allowance quantities are indicated in the
special tool lists section for special tools, TMDE,
b. When the Federal stock number or refer-
and other support equipment.
ence number is known, follow the procedures
given in (1) and (2) below.
g. 1-Year Allowance Per 100 Equipments/Con-
tingency Planning Purposes. Column intention-
(1) Refer to the index of Federal stock num-
ally left blank.
bers (sec IV) and locate the Federal stock num-
h. Depot Maintenance Allowance Per 100
ber or reference number. The FSN and reference
Equipments. This column indicates opposite the
number are cross-referenced to the applicable
first appearance of each item the total quantity
figure and item number or reference designation.
authorized for depot maintenance of 100 equip-
(2) Refer to the repair parts list (see 11)
ments.
and locate the figure number (col 10a) and item
number or reference designation (col 10b) as
i. Illustration. This column is divided as fol-
lows :
noted in the FSN index.
(1) Figure number. Indicates the figure
c. When the figure and item number or refer-
number of the illustration on which the item is
ence designation are known, scrutinize columns
shown in TM 11-6625-273-35.
10a and 10b of the repair parts list (see II) until
(2) Item number. Indicates the item number
the item is located.
or reference designation used. to reference the
d. When the FSN, reference number, figure
item in the illustration.
number, item number and reference designation
are not known, scrutinize column 3 of the repair
1-4. Special Information
parts list (sec II), which is arranged in alpha-
a. Usable on codes are included in column 3.
betical order.
Uncoded items are applicable to all models. Iden-
1-6. Abbreviations
tification of the usable on codes used in this publi-
Not applicable.
cation are-
Code
Used on
AN/GSM-6
AGC
Improvements
AGD
AN/GSM-6A
The reporting of errors, omissions, and recom-
b. The following publications pertain to the
mendations for improving this publication by the
equipment and its components:
individual user is encouraged. Reports should be
TM 11-6625-273-12
Operation and Organiza-
submitted on DA Form 2028 (Recommended
Changes to Publications) and forwarded direct
tional Maintenance: Insu-
lation Breakdown Test
to Commander, US Army Electronics Command,
ATTN: AMSEL-MA-CRA, Fort Monmouth, N.J.,
Sets AN/GSM-6 and AN/
GSM-6A.
07703.
(Next printed page is 6)
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |