Maintenance code - TM-11-6625-241-40P0003

*TM 11-6625-241-40P

Code

Explanation

Code

Application/Explanation

the replacement of the next higher assembly.

O - The lowest maintenance level capable of complete

XB - Item is not procured or stocked. If not available

repair of the support item is the organizational

through salvage, requisition.

level.

XC - Installation drawing, diagram instruction sheet, field

F - The lowest maintenance level capable of complete

service drawing, that is identified by

repair of the support item is direct support.

manufacturers' part number.

H - The lowest maintenance level capable of complete

XD- Support items can be requisitioned with justification.

repair of the support item is general support.

NOTE

D - The lowest maintenance level capable of complete

Cannibalization or salvage may be used as a

repair of the support item is the depot level.

source of supply for any items source coded

L - Repair restricted to designated Specialized Repair

above except those coded XA and aircraft

Activity.

support items as restricted by AR 700-42.

Z - Non-repairable. No repair is authorized.

(2) Maintenance code. Maintenance codes are

B - No repair is authorized.

The item may be

assigned to indicate the levels of maintenance

reconditioned by adjusting, lubricating, etc., at

authorized to USE and REPAIR support items. The

the user level. No parts or special tools are

maintenance codes are entered in the third and fourth

procured for the maintenance of this item.

positions of the Uniform SMR Code Format as follows -

(3) Recoverability code. Recoverability codes are,

(a) Use (third position). The maintenance

assigned to support items to indicate the disposition

code entered in the third position indicates the lowest

action on unserviceable items. The recoverability code is

maintenance level authorized to remove, replace, and

entered in-the fifth position of the uniform SMR Code

use the support item. The maintenance code entered in

Format as follows -

the third position indicates one of the following levels of

maintenance.

Code

Explanation

Code

Application/Explanation

Z - Nonrepairable item. When unserviceable, condemn

O - Support item is removed, replaced, used at the

and dispose at the level indicated in the first digit

organizational level of maintenance.

of the maintenance code.

NOTE

O - Repairable item. When uneconomically repairable,

A code "C" may be used in this position to

condemn and dispose at organizational level.

denote crew or operator maintenance performed

F - Repairable item. When uneconomically repairable,

within organizational maintenance.

condemn and dispose at the direct support level.

F - Support item is removed, replaced, used at the direct

H - Repairable item. When uneconomically repairable,

support maintenance level.

condemn and dispose at the general support

H - Support item is removed, replaced, used at the

level.

general support maintenance.

D - Repairable item. When beyond lower level repair

D - Support items that are removed, replaced, used at

capability, return to depot. Condemnation and

depot only.

disposal not authorized below depot level.

(b) Repair (fourth position). The mainte-

L - Repairable item. Repair, condemnation, and disposal

nance code entered in the fourth position indicates

not authorized below depot/Specialized Repair

whether the item is to be repaired and identifies the

Activity level.

lowest maintenance level with the capability to perform

A - Item requires special handling or condemnation

complete repair (i.e., all authorized maintenance

procedures because of specific reasons (i.e.,

functions). When a maintenance code is not used a

precious metal content, high dollar value, critical

Sash (-) sign is entered. For multi-service equipment

material or hazardous material).

/systems or when a code is entered, this position will

contain one of the following maintenance codes as

assigned by the service(s) that require the code-