SECTION I INTRODUCTION - TM-11-6625-241-40P0002

*TM 11-6625-241-40P

SECTION I

INTRODUCTION

Code

Explanation

1-1. Scope

This manual lists repair parts and special tools required

PC - Item procured and stocked and which otherwise

for the performance of general support and depot

would be coded PA except that it is deteriorative

maintenance of the ZM-3/U and ZM-3A/U. The PCCN

in nature.

for the equipment is GCWAJF for all models.

PO - Support item, excluding support equipment, pro-

NOTE

cured for initial issue or outfitting and stocked

No parts authorized for stockage at direct

only for subsequent or additional initial issues or

support.

outfittings. Not subject to automatic replenish-

1-2. General

ment.

This repair parts and special tools list is divided into the

PE - Support equipment procured and stocked for initial

following sections:

issue or outfitting to specified maintenance

a. Repair Parts List - Section II. A list of repair parts

repair activities.

authorized for the performance of maintenance at the

PF - Support equipment which will not be stocked but

general support depot. This repair parts list is arranged

which will be centrally procured on demand.

in alphabetical order.

PG - Item procured and stocked to provide for sustained

support for the life of the equipment. It is applied

b. Special Tools, Test and Support Equipment -

to an item peculiar to the equipment which

Section III. A list of special tools, test and support

because of probable discontinuance or

equipment authorized for the performance of

shutdown of production facilities would prove

maintenance at the general support and depot level.

uneconomical to reproduce at a later time.

KD - An item of depot overhaul/repair kit and not

c. Index - Federal Stock Number and Reference

purchased separately. Depot kit defined as a kit

Number Cross-Reference to Figure and Item Number -

that provides items required at the time of

Section IV. A list, in ascending numerical sequence, of

overhaul or repair.

all Federal stock numbers appearing in the listings,

KF - An item of a maintenance kit and not purchased

followed by a list, in, alphameric sequence, of all

separately. Maintenance kit defined as a kit that

reference numbers appearing in the listings. Federal

provides an item that can be replaced at

stock number and reference numbers are cross-

organizational or direct support or general

referenced to each illustration figure and item number or

support levels of maintenance.

reference designation appearance.

KB - Item included in both a depot overhaul/repair kit and

1-3. Explanation of Columns

a maintenance kit.

The following provides an explanation of columns found

MO - Item to be manufactured or fabricated at organiza-

in the tabular list.

tional level.

a. Source, Maintenance, and Recoverability Codes

MF - Item to be manufactured or fabricated at direct

(SMR).

support maintenance level.

(1) Source code. Indicates the manner of

MH - Item to be manufactured or fabricated at general

acquiring support items for maintenance, repair, or

support maintenance level.

overhaul of end items. Source codes are -

MD - Item to be manufactured or fabricated at depot

maintenance level.

Code

Explanation

AO - Item to be assembled at organizational level.

PA - Item procured and stocked for anticipated or known

AF - Item to be assembled at direct support mainte-

usage.

nance level.

PB - Item procured and stocked for insurance purposes

AH - Item to be assembled at general support mainte-

because essentiality dictates that a minimum

nance level.

quantity be available in the supply systems.

AD - Item to be assembled at depot maintenance level.

XA - Item is not procured or stocked because the re-

quirements for the item will result in