|
|
TM 11-5920-252-24
3-18.
TROUBLESHOOTING
USE OF TABLE 3-2
Table 3-2 will Indicate which circuits require further tests to Isolate the possible fault.
Test Set TS-3760/G set up:
Ac power applied.
MODE SELECT SWITCH in AUTO position.
POWER SWITCH ON.
Test leads connected in turn to circuits of faulty channel.
Push START switch.
Refer to Table 3-2 for indication.
Push RESET switch upon completion of each circuit test.
TABLE 3.2. TROUBLESHOOTING
Symptom
No.
Symptom
Procedure
Corrective Action
1
Faulty communications
Perform steps 1 through
Refer to Symptoms No. 2
channel.
4 of table 3-1.
and No. 3 below.
2
TS-37601G red light
a. Refer to table 3-3
a. Check cabling and wiring
Condition column
of input and output
No. 1.
circuits of the arrester
faulty line.
b. Refer to table 3-3
b. Replace arrester.
Condition column
No. 3.
3
TS-3760/G SGOK light
Refer to table 3-4
Replace arrester.
off and garble sound
Condition column
heard.
No. 2.
3-16
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |