 |
|||
|
|
|||
|
Page Title:
SECTION III PERFORMANCE TEST CHECKS |
|
||
| ||||||||||
|
|
 T.O. 31S5-4-308-l
TM 11-5805-663-14-13
NAVELEX 0967-464-0010
PERFORMANCE TEST CHECKS
6-90. GENERAL.
h. Repeat steps a and b.
6-91. The performance test checks, when
i . In data line, switch 2 is lit and a
successfully completed, as sure that Pro-
loop count is displayed in bits 4 through
cessor and Core Memory functions meet
15.
minimum performance standards.
j . Press reset switch and then load
switch.
k. When tape motion halts, press RUN
perform the following preliminary procedures:
switch.
a . Check that all power switches in
1. TTY prints:
Data Processing Assembly Al and TTY
(KSR-35 at ACOC Group, ASR-35 at
INTERRUPT TEST REV A
Switch Group) are ON.
TST 01
b. All tests are contained on one ATP
test tape; autoload the test tape as
PRESS RUN, OPERATOR ATTEN-
described in paragraph 6-15.
TION
6-94. TEST CHECKS.
m. Turn OFF LINE FREQ switch (S70)
located at lower edge of Program Mainte-
6-95. Once the preliminary procedures have
nance Panel.
been accomplished, perform the test checks
as described below.
n. Press run switch and then attn
switch.
a . Press reset switch and then load
switch.
o.
TTY prints:
b. When tape motion halts, press run
TST 02
switch.
PRESS RUN, OPERATOR ATTEN-
In data line, switch 0 is lit and a
TION
C.
loop count is displayed in bits 4 through
15.
p. Press run switch and then attn
switch.
d. Repeat steps a. and b.
q . TTY prints:
e . In data line, switch 1 is lit and a
loop count is displayed in bits 4 through
TST 03
15.
PRESS RUN, OPERATOR ATTEN-
f. Repeat steps a. and b.
TION
In data line, switches 1 and 0 are
g.
tit and a loop count is displayed in bits 4
r. Press run switch and then attn
through 15.
switch.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals