Special Information - TM-11-5805-354-24P0004

b. The following publications pertain to the TA-

agency, etc., and is identified in SB 708-42.

125/GT and its oomponents:

d. Unit of Measure (U/M). Indicates the standard

or basic quantity by which the listed item is used

TM 11-2138 Terminal Box TA-125/GT, Telephone Re-

in performing the actual maintenance function. This

peating Coil Assembly TA-145/GT,

measure is expressed by a two-character alphabe-

Maintenance Kit MX-842/GT, and

tical abbreviation; e.g., ea, in, pr, etc., and is the

Switchboard Signal TA-123/GT.

basis used to indicate quantities and allowances in

1-5. Location of Repair Parts

subsequent columns. When the unit of measure

differs from the unit of issue, the lowest unit of

a. This manual contains one cross-reference index

issue that will satisfy the required units of measure

(sec VII) to be used to locate a repair part when

will be requisitioned.

either the Federal stock number or reference number

e. Quantity lncorporated in Unit. This column in-

(manufacturer's part number) is known. The first

dicates the quantity of the item used in the equip-

column in the index is prepared in numerical or al-

ment. Subsequent appearances of the same item in

phanumeric sequence in ascending order. The refer-

the same assembly are indicated by the letters

ence numbers (manufacturer's part numbers) are

"REF".

listed immediately following the last listed Federal

f. 15-Day Organizational Maintenance Allowances..

stock number in the index of Federal stock numbers.

Not applicable.

b. When the Federal stock number or reference

g. 80-Day DS/GS Maintenance Allowances.

number is known, follow the procedures given in (1)

NOTE

and (2) below.

Allowances in GS column are for GS main-

(1) Refer to the index of Federal stock numbers

tenance only.

(see VII), and locate the Federal stock number or

(1) The repair parts indicated by asterisk entries

reference number. The FSN and reference number

in separate allowance columns for DS and GS repre-

are cross-referenced to the applicable figure and

sent those authorized for use at that category of

item number or reference designation.

maintenance to be requisitioned on an "as required"

(2) Refer to the repair parts list (see III and V)

basis, until stockage is based on demand in accor-

and locate the figure number (col 7a-20P, 10a-34P)

dance with AR 710-2.

and item number or reference designation (col 7b-

(2) Allowance quantities are indicated in the

20P, 10b-34P) as noted in the FSN index.

special tool lists section for special tools, TMDE,

c. When the figure and item number or reference

and other support equipment.

designation are known, scrutinize columns 7a and

h. 1-Year Allowances Per 100 Equipments/Con-

7b-20P and 10a and 10b-34P, of the repair parts

tingency Planning Purposes. Column intentionally

list (sec III and V) until the item is located.

left blank.

d. When the FSN, reference number, figure num-

i. Depot Maintenance Allowance Per 100 Equip-

ber, and item number are not known, scrutinize col-

ments. This column indicates opposite the first

umn 3 of the repair parts list (see III and V), which is

appearance of each item the total quantity autho-

arranged in alphabetical order.

rized for depot maintenance of 100 equipments.

1-6. Abbreviations

j. Illustration.

(1) Figure number. Not applicable.

Not applicable.

(2) Item number. Indicates the item number or

1-7. Reporting of Equipment Publication

reference designation used to identify the item.

Improvements

1-4. Special Information

The reporting of errors, omissions, and recommenda-

a. Usable on codes are included in column 3. Un-

tions for improving this publication by the individual

coded items are applicable to all models. Identifica-

user is encouraged. Reports should be submitted on

tion of the usable on codes used in this publication

DA Form 2028 (Recommended Change a to Publica-

are -

tions) and forwarded direct to Commander, US Army

Electronics Command, ATTN: AMSEL-MA-CW,

Fort Monmouth, NJ., 07703.

(Next printed page is 6)