CHAPTER2 INSTALLATION

CHAPTER 2

INSTALLATION

Unpacking.

10. Uncrating and Unpacking

(1) Open carrying cases No. 1 and 2 and

carefully remove the contents. Remove carrying case

No. 3 from carrying case No. 1.

a. Packaging and Packing Data. When packaged

(2) Remove all protective wrappings, wadding,

for shipment the packaged processing set is packed in

and preservative materials.

two wooden packing cases. The dimensions of each

(3) Open and remove the contents from

wooden packing case are 18 by 24 by 44 inches and the

carrying case No. 3.

approximate volume of each is 11 cubic feet. The total

(4) Remove dust from all components with a

weight of wooden packing case No. 1 is 180 pounds,

soft, lint-free cloth.

and that of wooden packing case No. 2 is 165 pounds.

b. Uncrating. The following uncrating procedures

11. Checking Unpacked Equipment

apply to each wooden packing case.

a. Check the projection and condensing lenses; be

(1) Cut the metal straps and remove them from

sure that they are not broken, cracked or otherwise

the wooden packing case.

damaged. Do not touch the lens surfaces.

(2) Remove the nails from the wooden cover

b. Check the bellows for tears, rips, and cuts.

with a nail puller, and remove the wooden

Check all metal components to see that they are not bent

cover.

or broken.

(3) Open the waterproof barrier and the outer

c. Check the equipment against the parking list.

fiberboard carton and expose the metal

When no packing list accompanies the equipment, the

container.

table of components (par. 5) and/or the packaging data

(4) Carefully open the metal container and the

(par. 10a) may be used as a

inner fiberboard carton.

(5) Remove the carrying case.

TM405-10-11

Figure 10. Packaging diagram.

AGO 5894A