ADJUSTMENT OF BRAKE BANDS

TM 11-3895-209-14

4-16. ADJUSTMENTS

Engine adjustments are covered in TM 5-5805-257-14. The only reeling mechanisms that require

adjustment are the brake bands and the idler arms.

ADJUSTMENT OF BRAKE BANDS

For correct operation, the brake bands must be adjusted to obtain free movement of the shaft when

the brake is released and firm, positive braking when the brake is engaged. To adjust the brake

band of either the upper or the lower clutch and brake assembly, proceed as follows:

A Release the fasteners and open both guard doors.

B Bend the locking tab down on the key washers on the two mounting bolts near the top of the

brake band.

C Adjust each of the mounting bolts to obtain minimum clearance (approximately 1/64 inch) be-

tween the brake band and the drum.

4-15