DISASSEMBLY AND REASSEMBLY OF HUBLOCKIH6 DEVICE

TM 11-3895-209-14

4-15. DISASSEMBLY AND REASSEMBLY OF HUBLOCKIH6 DEVICE

DISASSEMBLY

Follow the procedure given below to disassemble any

one of the four hub locking devices:

A Remove nut (2) from head bolt (1).

B Remove head bolt (1), and lift out cam (4) and bear-

ing (3). Remove bearing from cam.

C Remove the four bolts (5) and lock washers (6) that

secure the bracket (7) to the bearing housing.

D Lift locking pin (8) out of the housing and remove

the locking pin spring (9), spring seat (10), and lock-

ing pin seal (1 1).

REASSEMBLY

A Assemble locking pin (8), locking pin spring (9),

spring seat (1 0), and locking pin seal (1 1).

B Replace the four bolts (5) and lock washers (6) that

secure the bracket (7) to the bearing housing.

Replace bearing (3) in cam (4).

Replace head bolt (1) and nut (2).

4-14