REPLACEMENT - TM-11-3895-209-140045

TM 11-3895-209-14

4-14. REMOVAL AND REPLACEMENT OF IGNITION SWITCH - Continued

D Remove bolt (4) and lock washer (5) that secure the wiring clamp (6) to the engine. Remove

clamp and replace the screw and lock washer in the engine cowling.

E Remove nut (2), lock washer (3), and

screw (1) that connect the ground wire to

the frame.

F Remove nut (9) and pull the IGNITION

switch (11 ) with key washer (10) clear of

the equipment.

G Remove the four screws (7) and lock

washer (8) and disconnect the wires from

IGNITION switch (11).

REPLACEMENT

A Connect the wires to IGNITION switch

(11) and replace the four screws (7) and

lock washer (8).

B Replace IGNITION switch (11) with key

washer (10) and nut (9).

c Replace ground wire to the frame with nut

(2), lock washer (3) and screw (1).

D Replace bolt (4) and lock washer (5) that

secures the wiring clamp (6) to the

engine.

E Pull the two IGNITION switch wires

through the grommet and connect to the

magneto terminals.

F Replace cover to engine accessory case

and close guard door.

4-13