CHAPTER 4 ORGANIZATIONAL MAINTENANCE INSTRUCTIONS

TM 11-3895-209-14

CHAPTER

ORGANIZATIONAL MAINTENANCE INSTRUCTIONS

Section I. REPAIR PARTS, SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT

4-1. GENERAL

Repair parts are listed and illustrated in TM 11-3895-209-24P. No special tools are required for main-

tenance of the equipment. Test, maintenance and diagnostic equipment (TM DE), and support equip-

ment include standard electrical test equipment found in any organizational maintenance electric

shop.

For authorized common tools and equipment refer to the Modified Table of Organization and Equip-

ment (MTOE) applicable to your unit.

Adequate ventilation should be provided while using TRICHLOROTRIFLUOROETHAN E.

Prolonged breathing of vapor should be avoided. The solvent should not be used near

heat or open flame; the products of decomposition are toxic and irritating. Since

TRICHLOROTRIFLUOROETHANE dissolves natural oils, prolonged contact with the skin

should be avoided. When necessary, use gloves which the solvent cannot penetrate. If

the solvent is taken internally, consult a physician immediately.

Tool set, general mechanics (NSN 5180-00-177-7033, Multimeter AN/RM-105 and the

following materiaa are require

for organization maintenance of RL-207/G:

TRICHLOROTRIFLUOROETHANE

(NSN

Cleaning

cloth

Lubricating oil, internal combustion engine (OE-30)

Section Il. SERVICE UPON RECEIPT OF EQUIPMENT

4-2. UNPACKING

PACKAGING DATA

When packed for shipment, the RL-207(*)/G is packed in a wooden box. The dimensions of this box

are 50 by 50 by 41 inches and the volume is 59.3 cubic feet. The weight of the packed equipment is

approximately 790 pounds.

REMOVING CONTENTS, EXPORT PACKAGING

WARNING

Reeling Machine RL-207(*)/G weighs 490 pounds. Be careful when moving. Mechanical

lift required.

CAUTION

Be careful when unpacking equipment. Do not thrust tools into the interior of the shipping

container; this procedure may result in damage to the equipment.

4-1