REMOVAL AND REPLACEMENT OF UPPER AND LOWER DRIVE BELTS

TM 11-3895-209-14

3-7. REMOVAL AND REPLACEMEHT OF UPPER AND LOWER DRIVE BELTS- Continued

D Disengage the upper axle drive belt

from the drive pulley and idler

guides.

E Disengage the lower axle drive belt

from the jackshaft pulley. If

necessary, operate the control lever

to the brake position to release all

tension from the idler arm.

F Disengage the lower axle drive belt

from the drive pulley and idler.

REPLACEMENT

A Engage the lower axle drive belt to

the drive pulley and idler.

B Engage the lower axle drive belt to

the jackshaft pulley.

C Engage the upper axle drive belt to

the drive pulley and idler guides.

D Engage the upper axle drive belt to

the jackshaft pulley.

E Replace the two bolts, lock washers,and flat washers that secure the belt spafcer to the jack-

shaft assembly, and replace the belt spacer.

NOTE

Check to be sure the control levers tighten the belts when operated to the run position.

3-7/(3-8 blank)