ASSEMBLY AFTER TESTING

TB 9-289

d. Prime per MIL-P-53030; or MIL-P-53022. Dry film thickness shall be 0.8 to 1.5 mils.

e. Top coat color green 383 per MIL-C-46168 or MIL-C-53039. Dry film thickness shall be 1.8 Mils minimum.

f. Application of CARC paint to be in accordance with MIL-C-53072.

8. ASSEMBLY AFTER TESTING

a. For Type I container, install pressure safety valve ( NSN 4820-00-620-81 23; Part number 8376456) and filler

valve (NSN 4820-00-242-4064, part number 8376442) if not previously installed prior to testing.

b. For Type II container, install breather valve assembly ( NSN 8145-01-005-2994), Part Number 2642880).

c. Reinstall all desiccant port cover/assemblies. Replace damaged covers/assemblies with new.

d. Install new installation instruction decal if original is missing or unserviceable. (See paragraph 4.d.)

e. Install new humidity indicator assembly. If irreversible in dicator is required, do not install new indicator until item

is to be sealed in the container. Install plug with gasket in indicator hole

9. MARKING

a. Each container data plate shall be marked with container part number, container National Stock Number (NSN)

contract number for reconditioning the container and container specification. The container specification shall be TB

9-289. Additionally, if contract is for item in container, the item part number, item National Stock Number, combination

Part Number and combination National Stock Number shall be marked on the data plate.

b. Specific containers will be marked in accordance with the drawings for that container.

c. Stenciled markings must be in black CARC paint per MIL-C-46218 or MIL-C-53039.