Treat/Paint Repaired Joint

TB9-2510-242-40

weld profiles are in accordance with paragraph 4.1.8 -

undercut does not exceed the values provided in Table 5

replacement weld joints of the same type and size as the original weld

base metal repair welds achieve full thickness of the base metal

single continuous fillet welds may not underrun nominal specified fillet weld size by more than 1/16 inch

without correction, and the undersized portion may not exceed 10% of the weld

no undersized fillet weld permitted at the ends of web-to-flange welds on structural members, for a length

equal to twice the width of the flange

no visible metallic inclusions in weld

4.1.12 Treat/Paint Repaired Joint. Treat and paint welded joints, new material, and reinforced areas according to the

requirements of TACOM Drawing No. 19207-12344846-400, Treatment and Paint Spec for Tactical Vehicles and

Components and Drawing No. CPR101077, For Ramp Assembly.

E-20