SECTION I. 3/4, AND 1-1/4 TON TO 2-1/2 TON SERIES VEHICLE REQUIREMENTS

TB 9-2300-247-40

CHAPTER 3

FRAME ALINEMENT INSPECTION

SECTION I. 3/4, AND 1-1/4 TON TO 2-1/2 TON SERIES VEHICLE REQUIREMENTS

Tools: Light:

Applicable Vehicle Models/Series: M966, M996,

Extension, 25 ft. length

M997, M998, M1008, M1008A1,

Jack, Hydraulic, 12-ton capacity

M1009, M1010, M1025, M1026, M1028,

Jack, Hydraulic, 30-ton capacity

M1028A1, M1028A2, M1035, M1036, M1037,

Plumb Bob, 10 oz.

M1038, M1042, M1043, M1044, M1045,

Square, 24 in.

M1046.

Tape Measure, 25 ft. long

Reference Publications: TM 9-2320-289-34

Expendable Supplies:

Paper, white, 8 x 10-1/2 sheets

(1) Perform Frame Leveling in accordance

Fitting, Grease

with paragraphs 27a. thru 27g. and

Pencil

figures 5 and 6.

String, 12-ply, 25 ft. long

Tape, Masking, 1 in. wide

(2) Perform all other frame alinement

checks as described in paragraphs 27

thru 31.

25.

Shop Conditions: Floor level with slope not

more than 3 inches in 24 feet in any direction, Floor

HMMMV Series Vehicle Frame Alinement

surface must be flat within 1 inch in 24 feet. Floor clean

Inspection.

of dirt, grease, oil, or debris.

Applicable Vehicle Models/Series: M998, M966,

M1036, M1045, M1046, M1025, M1026, M1043, M1044,

26.

Equipment Condition:

Vehicle empty and

M1037, M1042,

vehicle undercarriage clean and completely free of mud,

dirt, and debris.

Reference Publications: TM 9-2320-280-34

27.

3/4, 1-1/4 and To 2-1/2 Ton Vehicle Series

(1) Perform frame leveling as described in

Frames.

paragraphs 27a. thru 27g. and figures 5

and 6.

CUCV Series Vehicle Frame Alinement

Inspection.

(2) Perform all other frame alinement checks in

accordance with paragraphs 27 thru 31.

SECTION II. 5-TON SERIES VEHICLES REQUIREMENTS

Applicable Vehicle Models/Series: M39, M39A1,