Coded Standards - SB-740-95-100006

SB 740-95-10

Code

Name

the lot will have the same chance of being selected as

Cleaning, preservation, painting, plating, or other

any other unit.

processing.

d. Inspection Methods.

Packaging.

(1) For those lots provided Level A or Level B

Packing and loading.

military packaging protection, inspect each item in the

Marking and labeling.

sample selected for damaged or deteriorated packaging.

Materiel deficiencies.

(a) In the event packaging of an item is

Materiel deficiencies (continued).

deter- mined not to be damaged or deteriorated, do not

Functional certification or performance test

re- move the packaging. Further inspection of the item is

Document recording or routing deficiencies.

Storage deficiencies.

not required and the item shall be accepted.

Miscellaneous.

(b) In the event packaging of an item is

(3) General groups and defects (second and

deter- mined to be damaged or deteriorated, inspect the

third digits).

item for the defects coded in appendix A or specified in

(a) Group 0 (cleaning, preservation,

any applicable quality assurance inspection instruction.

painting, plating, or other processing).

(2) For those lots provided industrial packaging

Quality

protection, inspect each item in the sample selected for

Defect

the defects coded in appendix A or specified in any

Code

Explanation

applicable quality assurance inspection instruction.

Appearance (paint runs, overspray, not uniform, or

e. Defect Classification. Defects are classified by

not meeting standard).

severity (critical, major, or minor).See MIL-STD-105D for

Cleaning improper or inadequate.

definitions.

Quality defect codes are defined in

Preservation improper or inadequate.

paragraph 2-6a. Specific codes pertaining to each stock

Wrapping improper or inadequate.

Protection afforded not compatible with mode of

numbered item are cited in appendix A.

shipment, type of storage, destination, or other

environment.

2-6. Coded Standards. The following is an explanation

Inadequate coverage or improper thickness.

by heading of the codes used in appendix A.

Improper and inadequate preparation.

a. Quality Defect Code. The codes, based oil the

Wrong type, method, or color.

definitions given in appendix A of DARCOM-R 702-7,

Drying improper or inadequate.

are given as three digit numbers. The first digit identifies

Reserved for future use.

the severity of the defect by category. The second digit

(b) Group 1 (packaging).

Quality

identifies one of the named general groups. The third

Defect

digit identifies the actual defect within one of the general

Code

Explanation

groups.

No packaging applied.

Sealing defective (bags or containers).

Example: Using the meanings and explanations given

Failed pressure retention, leak, or other test.

below, Code 113 indicates; 1-major, 1-packaging group,

Container damaged or deteriorated.

and 3-container damaged or deteriorated. The codes in

Protection not compatible with mode of shipment,

appendix A require inspection of an item for the actual

type of shipment, destination, or other environment.

defect identified. Unusual circumstances, such as

Wrong level applied.

Containers or other packaging materials do not meet

storage conditions, temperature, or humidity, may cause

specifications (e.g., size, type, class, or style).

other deficiencies not tabulated in appendix A. Report

Wrong quantity per unit package. (Chargeable as

any other defects observed but not contained in the

one defect per unit pack. Major defect, if shortage-

tabulation using the following coding sys- tem.

minor defect, if overage.)

Reserved for future use.

(1) Severity (first digit).

Reserved for future use.

Quality Defect Code