 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-4940-225-34P
indicates the reference number followed
by the applicable Federal Supply Code for
Manufacturer (FSCM) in parentheses. The
(2) Maintenance code indicates the low-
F S C M is used as an element in item
est level of maintenance authorized to in-
identification to designate manufacturer or
stall the repair part and/or use the special
distributor or Government agency, etc.,
tool or test equipment for each application.
and is identified in SB 708-42. Items that
Capabilities or higher maintenance cate-
are included in kits and sets are listed
g o r i e s are considered equal or better.
below the name of the kit or set with
Maintenance codes are:
quantity of each item in the kit or set indi-
cated in front of the item name.
d. Unit of Measure (U/M). Indicates the
standard or basic quantity by which the
listed item is used in performing the actual
m a i n t e n a n c e function. This measure is
expressed by a two-character alphabetical
abbreviation, e.g., ea, in, pr, etc., and is
(3) Recoverability code indicates
the basis used to indicate quantities and
w h e t h e r unserviceable items should be
allowances in subsequent columns.
returned for recovery or salvage. Items
e. Quantity Incorporated in Unit. This
not coded are nonrecoverable. Recover-
column indicates the quantity of the item
ability codes are:
used in an assembly group. A "U" appear-
ing in this column in lieu of a quantity in-
dicates that a definite quantity cannot be
indicated. (e. g., shims, spacers, etc.)
f. Thirty-Day DS/GS Maintenance Al-
lowances. Items authorized for use as re-
q u i r e d but not for initial stockage are
identified with an asterisk in the allow-
ance column.
g. One-Year Allowance Per 100 Equip-
ments/Contingency Planning Purposes.
Items authorized for use as required but
not for initial stockage are identified with
an asterisk in the allowance column.
h. Depot Maintenance Allowance Per 100
E q u i p m e n t s . Items authorized for use as
required but not for initial stockage are
identified with an asterisk in the allowance
column.
i. Illustration. This column is divided
as follows:
(1) Figure number. Indicates the figure
number of the illustration on which the
item is shown.
(2) Item number. Indicates the callout
number used to reference the item in the
illustration.
b. Federal Stock Number. Indicates the
4. Special Information
Federal stock number assigned to the item
a. Usable on codes are included in.
and will be used for requisitioning pur-
Column 3. Uncoded items are applicable
poses.
to all models and/or serial number range.
c. Description. Indicates t h e F e d e r a l
Identifications of the usable on codes used
i t e m name and a minimum description
in this publication are:
required to identify the item. The last line
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals