|
|
TM 5-4940-225-34P
SECTION I.
INTRODUCTION
1. Scope
code
a. This manual lists the repair parts
P
r e q u i r e d for the performance of direct
support, general support, and depot main-
tenance of the shop equipment.
P2
b. Repair parts listed represent those
a u t h o r i z e d for use at indicated mainte-
nance levels and will be requisitioned on
an " a s required" basis until stockage is
justified by demand in accordance with
P9
AR 710-2.
2. General
This Repair Parts and Special Tools L i s t
P10
is divided into the following sections:
a . Repair Parts List - Section II. A
l i s t of repair parts authorized at the
direct support, general support, and depot
levels for the performance of maintenance.
M
The list also includes parts which must
b e removed for the replacement of the
a u t h o r i z e d parts. P a r t s lists are com-
A
posed of assembly groups in ascending
n u m e r i c a l sequence, with parts in each
group listed in figure and item number
sequence.
b. Special Tools, Test and Support Equip-
ment - Section III. (Not applicable.)
X
c. Federal Stock Number and Reference
N u m b e r Index - S e c t i o n IV. A list, in
ascending numerical s e q u e n c e , of all
Federal Stock Numbers appearing in the
l i s t i n g s , followed by a list, in alpha-
X1
numeric sequence, of all reference num-
b e r s appearing in the listings. Federal
stock number and reference numbers are
X2
cross-referenced to each illustration figure
and/or item number appearance.
3. Explanation of Columns
The following provides an explanation of
G
columns found in the tabular list in Sec-
a. Source, Maintenance, and Recover-
ability Code (SMR).
(1) Source code indicates the source
for the listed items. Source Codes are:
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |