Disassembly - (cont.) - TM-5-4930-233-140327

TM 5-4930-233-14

TM 4930-14/1

AIR COMPRESSOR ASSEMBLY

5-14. AIR COMPRESSOR - REPAIR - (Cont.)

Disassembly - (cont.)

WARNING

Take care that pistons are not scratched or damaged during removal.

(9)

Remove elbow (16) and locknut (17).

(10) Remove six screws (19), end cover and cup assembly (20) and three gaskets (21).

(11) Remove two rivets (28), two weights (29), plunger (18), air valve (30), spring (31) and two bumper springs

(32).

(12) Remove bearing cup (22) from end cover (23) only if damaged or if bearing (24) is to be replaced.

(13) Remove tape and key (25) from crankshaft and cone assembly (26). Slide crankshaft and cone assembly

(26) along with pistons (10) and oil feeder ring (27) out of base and cup assembly (14) being careful not to

damage feeder ring.

(14) Remove weight retainer and shaft (33) and washer (34) from crankshaft.

(15) Drive oil seal (35) out of base and cup assembly (14) only if replacement is required.

(16) Remove bearing cup (36) from base (37) only if damaged or if bearing (38) is to be replaced.

(17) Remove two plugs (39), oil filler plug (40) and gasket (41).

5-68