FUEL TANK ASSEMBLY - REPAIR - TM-5-4930-233-140285

TM 5-4930-233-14

TM 4930-14/1

SKID SUB ASSEMBLY

5-6. FUEL TANK ASSEMBLY - REPAIR

This task covers:

a. Disassembly

b. Repair

c. Assembly

INITIAL SET-UP:

GENERAL SAFETY INTRODUCTIONS

Equipment Condition

Fuel Tank Removed (para 4-16)

WARNING

Tools

Do not use open flame or smoke

General Mechanics Tool Box

when working on the fuel system.

(Section III, Item 1, App B)

An explosion may occur, causing

severe injury or death.

a. Disassembly

(1) Remove elbow (1) and shutoff cock (2).

(2) Remove five screws (3), five starwashers (4), sending unit (5) and gasket (6).

(3) Remove engine fuel hose assembly (7), elbow (8), fuel filter (9), elbow (10), nipple (11), elbow (12) and

nipple (13).

(4) To disassemble fuel hose assembly (7) loosen two clamps (14) and remove two hose barbs (15). Slide

clamps (14) off of hose (16).

(5) Remove heater fuel hose assembly (17). Disassemble by loosening two clamps (18) and removing coupling

(19) and two hose barbs (20).

(6) Remove two clamps (18) from hose (21).

(7) Remove fuel strainer (22).

5-25