LOW AND HIGH PRESSURE PUMPS

TM 5-4930-233-14

TM 4930-14/1

LUBE TANK ASSEMBLY

4-37. LOW AND HIGH PRESSURE PUMPS - REPLACE

This task covers:

a. Removal

b. Installation

INITIAL SET-UP:

Materials/Parts

Equipment Condition

Teflon Tape

Air Regulator Removed

NOTE

(Item 18, App E)

The following procedure ap-

plies to the high pressure

Tools

pump or either of the two low

General Mechanics

pressure pumps.

Tool Box (Section III, Item 1, AppB)

a. Removal

(1)

Remove alcohol injector if needed (para 4-35).

(2)

Vent lube pressure by opening valve (1). Close valve.

(3)

Remove pneumatic muffler (2) and elbow (3).

(4)

Disconnect lube hose assembly (4) and remove adapter (5).

(5)

Loosen two clamps (6) and remove hose (7). Remove damps (6) from hose (7).

4-107