 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 1-4930-233-14
TM 4930-14/1
REEL CABINET ASSEMBLY
4-17. REEL CABINET ASSEMBLY - REPAIR
This task covers:
a. Disassembly
b. Repair
c.
Assembly
INITIAL SET-UP:
Personnel Required
Tools
2
General Mechanics Tool Box
(Section III, Item 2, AppB)
Drill with 3/16 Drill Bit
Equipment Condition
(Section III, Item 2, AppB)
Battery box assembly removed (para. 4-18)
Reel assemblies removed (para. 4-21)
a.
Disassembly
(1)
Remove winterization hose and duct (para 4-43)
(2)
Drill out rivet (1) and remove padlock and chain (2).
(3)
Remove lock bar (3).
(4)
Pull out top drawer (4) and remove compartment tray (5).
(5)
Remove two screws (6), two lockwashers (7), drawer stop (8) and top drawer (4). Repeat for lower drawer
(9).
(6)
Disconnect hose (10) at ball valve and air tank and remove hose.
(7)
Remove hose (10) by loosening two damps (11). Slide two clamps (11) off of hose (10). Remove two
fittings (12).
(8)
Remove cotter pin (14) and lever (15) from ball valve (13).
(9)
Remove ball valve (13).
(10) Remove grommet (16).
(11) Drill out ten rivets (17) and remove five identification plates (18).
(12) Remove four nuts (19), four lockwashers (20), eight flatwashers (21), four screws (22) and reel cabinet (23).
Change 1 4-33
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals