OPERATION OF AUXILIARY EQUIPMENT (CONT)

TM 5-4930-233-14

TM 4930-14/1

Buttonhead Fittings (9). Nine standard and nine giant buttonhead fittings, to be used as replacement parts,

are located in the upper drawer compartment.

Straight Hydraulic Fittings (10). Twelve straight hydraulic fittings, to replace defective fittings of varying

sizes, are located in the upper drawer compartment.

Forty-five Degree Hydraulic Lubrication Fittings (11). Twelve 45 hydraulic fittings, to replace defective

fittings it necessary, are located in the upper drawer compartment.

Easy-Out Tool (12). Two easy-out tools are used for removing grease fittings. They are located in the upper

drawer compartment.

Plug (13). Three plugs are used to plug hydraulic lines after disconnection.

Quick-Disconnect Air Line Couplings (14). One female and three male lube hose repair couplings are

located in the upper accessory drawer compartment.

High Pressure Hose End Fittings (15). Six female swivel and six male lube hose repair couplings are located

in the upper accessory drawer compartment.

Air Hose End Fittings (16). Three each male and female reusable hose end fittings of 1/4-inch inside

diameter air hoses are located in the upper drawer compartment.

Straight and Z-Swivel Adapters (17). A straight and a Z-swivel adapter are used to connect the control

valves to the supply hoses, thus permitting the valve to swivel for easy access to hard-to-reach fittings. The

swivel adapters are located in the upper drawer compartment.

2-24