|
|
TM 5-4930-233-14
TM 4930-14/1
Table 2-2. Preventive Maintenance Checks and Services
Not Fully
Item
Item To Check/
Mission Capable
No
Interval
Service
Procedures
If:
1.
Before
Fuel Tank
Inspect fuel tank and fuel lines for
The fuel system is leaking or
leaks or damage.
damaged.
2.
Before
Reel Cabinet Assembly
WARNING
Do not smoke or use an
open flame in the vicinity
when servicing the batteries.
Batteries generate hydrogen
gas, which can explode
causing severe injury or
DEATH.
Inspect batteries and battery cables
The batteries or battery
for damage or loose connections.
cables are missing or dam
aged.-
3.
Before
Air Compressor Assembly
a. Inspect air compressor and alternator
The drive belts are loose,
drive belts for looseness, wear or damage.
worn, damaged or
missing.
b. Inspect air compressor head assembly
The head assembly is dam-
for damage or leaks.
aged or leaking.
c. Inspect exhaust diverter and hoses
for damage or leaks.
d. Perform engine PMCS as required -
by TM 9-2805-262-14.
4.
Before
Lube Tank Assembly
a. Check alcohol injector for alcohol
level (para 3-5) if operation
is to take place in cold weather.
b. Inspect lube tank for proper lubricant
levels. Fill as required (para 2-5).
c. Inspect lube tank compartments
The lubricant is contaminated
for contamination.
by water, dirt etc.
5.
Before
Winterization Assembly
Inspect fuel line, fuel pump and heater for
Fuel is leaking.
leaks or damage.
6.
Before
Lube and Pneumatic
Inspect lube and pnuematic piping
The lube and pnuematic piping
Piping
for leaks, kinks, or damage.
is missing, damaged or
leaking.
7.
Before
Air Brake Assembly
a. Inspect air brake couplers, emergency
The air brake components
relay valve, air cleaners,
are leaking, damaged or
power cluster, air supply valve,
missing.
air tank, brake lines, tubes and
fittings for leaks or damage.
2-9
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |